EPSRC logo

Details of Grant 

EPSRC Reference: EP/C511999/1
Title: Materials Engineering To Optimise The Spin Dependent Transport Between Ferromagnetic Metals and Narrow Gap Semiconductors
Principal Investigator: Murdin, Professor BN
Other Investigators:
Hess, Professor O
Researcher Co-Investigators:
Project Partners:
IMEC Toshiba
Department: Advanced Technology Institute
Organisation: University of Surrey
Scheme: Standard Research (Pre-FEC)
Starts: 01 April 2005 Ends: 30 September 2008 Value (£): 221,474
EPSRC Research Topic Classifications:
Materials Characterisation Materials Synthesis & Growth
EPSRC Industrial Sector Classifications:
Electronics
Related Grants:
EP/C511972/1 EP/C512006/1 EP/C511980/1
Panel History:  
Summary on Grant Application Form
Spin injection, manipulation and detection are the prime characteristics of any future spintronics device. The single most critical problem that needs to be overcome if hybrid ferromagnetic metal-semiconductor devices are to be used for spintronic device applications, is the efficient transfer of spin between the two systems. The resistance mismatch between metals and semiconductors does not allow the differences in spin population that naturally exist in ferromagnetic metals to be preserved when a current is passed from metal to semiconductor. It has now been well established that to overcome this problem a high resistance interface needs to be engineered between metal and semiconductor. There has been some progress to date in the injection problem with engineered Schttky tunnel contacts. No progress has been made to address the spin detection problem. The aim of the proposal is to engineer the tunnel or Schottky barrier between the ferromagnetic metal semiconductor to optimise the spin injection and detection efficiencies across the interfaces. In this work we have chosen to use narrow gap semiconductors because they offer particular advantage. One advantage over the GaAs system is the range of lattice matched materials that can be used to create such barrier layer engineering. Other advantages are their much greater potential to manipulate the spin while traversing the semiconductor because of the higher spin orbit coupling, and high room temperature mobilities.. The most efficient spin injection has been from a dilute magnetic semiconductor (DMS) into the AIGaAs/GaAs system where there is no resisitivity mismatch problem. However, the low Curie temperature (Tc) of these materials, (as yet well below room temperature) limit the usefulness of DMS applications.
Key Findings
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Potential use in non-academic contexts
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Impacts
Description This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Summary
Date Materialised
Sectors submitted by the Researcher
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Project URL: http://www.surreyspintronics.com/
Further Information:  
Organisation Website: http://www.surrey.ac.uk