EPSRC Reference: |
EP/H010920/1 |
Title: |
Enhanced Ultrasonic 3D Characterisation Of Composites Using Full Matrix Capture Of Array Data |
Principal Investigator: |
Wilcox, Professor PD |
Other Investigators: |
|
Researcher Co-Investigators: |
|
Project Partners: |
|
Department: |
Mechanical Engineering |
Organisation: |
University of Bristol |
Scheme: |
Standard Research |
Starts: |
09 March 2010 |
Ends: |
20 June 2013 |
Value (£): |
224,140
|
EPSRC Research Topic Classifications: |
|
EPSRC Industrial Sector Classifications: |
Aerospace, Defence and Marine |
Transport Systems and Vehicles |
|
Related Grants: |
|
Panel History: |
Panel Date | Panel Name | Outcome |
21 Jul 2009
|
Mats, Mech and Med Engineering
|
Announced
|
|
Summary on Grant Application Form |
Recent years have seen increasing interest in the use of thick-section composites for safety-critical components in, for example, primary aircraft structure and fan blades in aero engines. All such components are required to undergo non-destructive evaluation (NDE) during manufacture; this is time consuming and NDE throughput is stretched to its limit internationally. Current composite Non-destructive Evaluation (NDE) is based on a qualitative empirical approach where a single normal-incidence ultrasonic probe is used to estimate the average ultrasonic attenuation from the amplitude of the back-wall reflection. While adequate for accepting or rejecting thin composite panels, this approach does not provide the level of defect characterisation and localisation necessary for the quantitative NDE of larger components.There is a clear and pressing industrial need for quantitative NDE techniques that can be applied to safety-critical composite components both at manufacture and in-service. An ultrasonic technique is the industrially preferred option for reasons of cost, safety and ease of deployment, but increased scanning speeds are required to speed up throughput. However, the conflicting demands of rapid scanning, high-penetration depth and accurate defect characterisation cannot be achieved with a single normal-incidence probe. Instead the data from multiple inspection directions must be combined. The necessary raw data can be rapidly and efficiently obtained using an ultrasonic array, but at present it cannot be exploited. This is due to the lack of (a) an appropriate forward model of oblique wave propagation and scattering processes, and (b) a suitable inversion scheme to turn the raw data into useful information. This is the motivation for the proposed research programme, the aim of which is to develop ultrasonic array data processing techniques based on physical reasoning for the characterisation of safety-critical aerospace composites. The programme requires advancement of the fundamental science of wave phenomena in composites, the solution of a challenging inverse problem and, crucially, the translation of the scientific findings into practical industrial solutions.
|
Key Findings |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
Potential use in non-academic contexts |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
Impacts |
Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
Summary |
|
Date Materialised |
|
|
Sectors submitted by the Researcher |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
Project URL: |
|
Further Information: |
|
Organisation Website: |
http://www.bris.ac.uk |