| EPSRC Reference: |
EP/J010901/1 |
| Title: |
Evolving the design of unicondylar knee replacement to improve post operative function |
| Principal Investigator: |
Jeffers, Dr J |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Mechanical Engineering |
| Organisation: |
Imperial College London |
| Scheme: |
First Grant - Revised 2009 |
| Starts: |
13 September 2012 |
Ends: |
12 March 2014 |
Value (£): |
99,620
|
| EPSRC Research Topic Classifications: |
| Biomechanics & Rehabilitation |
|
|
| EPSRC Industrial Sector Classifications: |
|
| Related Grants: |
|
| Panel History: |
| Panel Date | Panel Name | Outcome |
|
03 Feb 2012
|
Engineering Prioritisation Meeting - 3 Feb 2012
|
Announced
|
|
|
Summary on Grant Application Form |
|
The aim of this project is to evolve current unicondylar knee replacement (UKR) design paradigms based on contemporary knowledge of natural knee kinematics. The design concepts shall consider implants specific for knees with varus and valgus deformity, and an all polymer configuration that would remove metal from the replaced joint entirely. To achieve these aims, a large dataset of computed tomography scans of normal, varus and valgus knees will be generated. The geometry and morphology of these data will be analysed using principal component analysis and multivariate statistical methods such that key relationships are identified. These data shall be used to generate implant design concepts for normal, varus and valgus knees that can recreate the natural anterioposterior constraint of the medial tibiofemoral articulation during flexion. Design concepts shall be assessed for implant stress, bone strains and interface micromotion using an experimentally validated finite element (FE) protocol previously generated in our group. Once the FE gives acceptable values, rapid prototypes of the designs shall be manufactured and implanted in cadaver knees by an experienced surgeon. The kinematics during flexion shall be measured using established methods in our laboratory and compared to the natural knee to prove the concept of the prototype design. Successful delivery of the proposal will lead to the development of a UKR with significant advantages over existing devices including more natural kinematics and soft tissue tension, morphology to suit common deformities, and potentially lower cost materials and manufacturing methods. By supporting the final design concepts, the proposed research can be used to support clinical trials of the device or any subsequent regulatory submission. The proposed research is highly likely to succeed due to the close relationship our lab has with orthopaedic surgeons, our track record of commercialising concepts and the support of a well respected industry partner. The environment in which the proposed research will be conducted will therefore allow the project to thrive.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.imperial.ac.uk |