| EPSRC Reference: |
EP/L017016/1 |
| Title: |
In-situ monitoring of component integrity during additive manufacturing using optical coherence tomography |
| Principal Investigator: |
Groom, Dr KM |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Electronic and Electrical Engineering |
| Organisation: |
University of Sheffield |
| Scheme: |
Standard Research |
| Starts: |
01 April 2014 |
Ends: |
30 September 2016 |
Value (£): |
197,261
|
| EPSRC Research Topic Classifications: |
| Image & Vision Computing |
Manufacturing Machine & Plant |
|
| EPSRC Industrial Sector Classifications: |
| Manufacturing |
Electronics |
|
| Related Grants: |
|
| Panel History: |
| Panel Date | Panel Name | Outcome |
|
21 Nov 2013
|
Early Careers Forum 2013 Call
|
Announced
|
|
|
Summary on Grant Application Form |
Additive manufacturing has been hailed as representing the latest industrial revolution and has captured the imagination of expert users and the general public alike. New manufacturing capabilities have permitted us to explore new design freedoms and produce optimised products which are customised to the needs of the user. These trends are set to increase as the technology grows in capability and gathers credibility.
There are an array of machine tools available on the market at the moment that can realise parts direct from digital. These make use of various energy sources (e.g Lasers, electron beams, IR lamps, heated nozzles etc) and material feedstocks (e.g metal/polymer powders, photocurable resins, plastic wires) to realise the design intent. Unlike more established machine tools there is a marked lack of process monitoring and feedback control of key process variables in these systems. This presents a significant problem since there is no method for ensuring that all is well within the build process. Therefore, in many cases it is only possible to identify defects after the process is complete assuming they are visible at the surface. Of significant concern, when integrity of parts is critical, are defects within the body of components. These can only be observed through cross sectioning or processes such as X-Ray Computed Tomography (CT). Naturally this comes at some considerable cost and only provides information once a part has been produced.
Therefore, there is a real need for new methods to provide 'in process' information about the quality of the pre-fused material layer and the quality post melting. Clearly some penetration into the part is required to create a full picture which can be reconstituted in a layerwise manner to create an integrity map of parts upon completion. This can be used to identify buried regions which exhibit de-lamination, pores, cracking and density variations. Furthermore analysis of the deposition material pre melting should be able to identify voids and give some information about surface roughness and ideally material properties. Optical Coherence Tomography (OCT) is an imaging technique which, if tuned to the specific requirements of plastic imaging and applied in-situ within the AM tool, could be used to meet this challenge.
This project will enable high-value additive manufacturing to come of age through implementation of sophisticated, in-situ, real-time process control based on novel non-contact optical techniques. OCT is a non-invasive imaging technique, which has the potential to revolutionise additive manufacturing technologies. It will bring additive manufacturing in line with established production processes with respect to product integrity, whilst also offering significant cost and resource efficiencies to support the widespread deployment of additive manufacturing tools throughout the manufacturing sector and to develop new and untapped applications.
Appropriate high-speed OCT configurations aimed specifically at distinguishing between polymers of use in additive manufacturing are not currently available. Such a system will be built, integrating novel mid-IR components within an external cavity laser configuration, allowing vibration independent imaging of a range of single and multi-polymer parts.
A successful outcome of this project will be the realization of an OCT system capable of rapid analysis of the sub-surface microstructure (e.g. voids and composition) of additively manufactured parts composed of multiple plastics, and a scheme for its incorporation into the additive process whereby in-situ monitoring of process integrity is enabled. Beyond this data sets will be gathered and post processed to evaluate and demonstrate the applicability of this new technology to additive manufacturing
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.shef.ac.uk |