| EPSRC Reference: |
EP/P000878/1 |
| Title: |
Transpiration Cooling Systems for Jet Engine Turbines and Hypersonic Flight |
| Principal Investigator: |
Ireland, Professor P |
| Other Investigators: |
| Lee, Professor W |
Morrison, Professor J |
Cocks, Professor AC |
| Vandeperre, Professor LJM |
Green, Professor NR |
Ewart, Professor P |
| Sandham, Professor ND |
Bowen, Professor P |
McGilvray, Dr M |
| Deiterding, Dr R |
|
|
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Engineering Science |
| Organisation: |
University of Oxford |
| Scheme: |
Programme Grants |
| Starts: |
18 August 2016 |
Ends: |
17 August 2022 |
Value (£): |
6,136,938
|
| EPSRC Research Topic Classifications: |
| Aerodynamics |
Continuum Mechanics |
|
| EPSRC Industrial Sector Classifications: |
| Aerospace, Defence and Marine |
Manufacturing |
|
| Related Grants: |
|
| Panel History: |
|
|
Summary on Grant Application Form |
This grant will deliver a step change in the understanding and predictability of next generation cooling systems to enable
the UK to establish a global lead in jet engine and hypersonic vehicle cooling technology.
We aim to make transpiration cooling, recognised as the ultimate convective cooling system, a reality in UK produced jet
engines and European hypersonic vehicles. Coolant has the potential to enable higher cycle temperatures (improving efficiency following the 2nd law of thermodynamics) but invariably introduces turbine stage losses (reducing efficiency). Cooling system improvement must enable higher Turbine Entry Temperature (TET) while using the minimum amount of coolant flow to achieve the required component life. For high speed flight, heat transfer is dominated by aerodynamic heating with gas temperatures on re-entry exceeding those at the surface of the sun. Any
reduction in heat transfer to the Thermal Protection System will ultimately lead to lower mass, allowing for decreased launch costs Furthermore, the lower temperatures could serve as an enabler for higher performance technologies which are currently temperature limited.
The highest temperatures achievable for both jet engines and hypersonic flight are limited by the materials and cooling
technology used. The cooling benefits of transpiration flows are well established, but the application of this technology to aerospace in the UK has been prevented by the lack of suitable porous materials and the challenge of accurately modelling both the aerothermal and mechanical stress fields. Our approach will enale the coupling between the flow, thermal and
stress fields to be researched simultaneously in an interdisciplinary approach which we believe is essential to arrive at the best transpiration systems. This Progreamme Grant will enable world leaders in their respective fields to work together to solve the combination of cross-disciplinary problems that arise from the application of transpiration cooling, leading to rapid innovations in this technology. The
application is timely since the proposed research would enable the UK aerospace industry to capitalise on recent
developments in materials, manufacturing capability, experimental facilities/measurement techniques and computational
methods to develop the science for the application of transpiration cooling.
The High Temperature Research Centre at Birmingham University will provide the means to cast super alloy turbine aerofoils with porosity. The
proposed grant would allow innovation in the cast systems arising from combining casting expertise with aerothermal and
stress modelling in recent EPSRC funded research programmes. It also builds upon material development of ultra-high
temperature ceramics and carbon composites undertaken in EPSRC funded research, by use of controlled
porosity and multilayer composites. It will also provide the first opportunity to undertake direct coupling of the flow with the
materials (porous and non-porous) at true flight conditions and material temperatures.
Recent investment in the UK's wind tunnels under the NWTF programme (EPSRC/ATI funded) at both Oxford University and
at Imperial College will allow for direct replication of temperatures and heat fluxes seen in flight and interrogated using
advanced laser techniques. Recent development of Fourier superposition in CFD grids for modelling film cooling can now
be extended to provide a breakthrough method to predict cooling flow and metal effectiveness for high
porosity/transpiration cooling systems.
The European Space Agency has recently identified the pressing requirement for alternatives to one-shot ablative Thermal
Protection Systems for hypersonic flight. Investment in this area is significant and transpiration cooling has been identified
as a promising cooling technology. Rolls-Royce has embarked upon accelerated investment in new technologies for future jet engines including the ADVANCE
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.ox.ac.uk |