| EPSRC Reference: |
EP/R028826/1 |
| Title: |
Revisiting optical scattering with machine learning (SPARKLE) |
| Principal Investigator: |
Leach, Professor R |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Faculty of Engineering |
| Organisation: |
University of Nottingham |
| Scheme: |
Standard Research |
| Starts: |
01 June 2018 |
Ends: |
31 May 2021 |
Value (£): |
321,648
|
| EPSRC Research Topic Classifications: |
| Design & Testing Technology |
Optical Devices & Subsystems |
|
| EPSRC Industrial Sector Classifications: |
|
| Related Grants: |
|
| Panel History: |
| Panel Date | Panel Name | Outcome |
|
22 Feb 2018
|
Manufacturing Prioritisation Panel - Feb 2018
|
Announced
|
|
|
Summary on Grant Application Form |
The surface topography of a component part can have a profound effect on the function of the part. In tribology, it is the surface interactions that influence such quantities as friction, wear and the lifetime of a component. In fluid dynamics, it is the surface that determines how fluids flow and it affects such properties as aerodynamic lift, therefore, influencing efficiency and fuel consumption of aircraft. Examples of the relationships between the topography of a surface and how that surface functions in use can be found in almost every manufacturing sector, both traditional and high-tech. To control surface topography, and hence the function and/or performance of a component, it must be measured and useful parameters extracted from the measurement data. There are a large number instruments that can measure surface topography, but many of them cannot be used realistically for real-time in-process applications due to the need for scanning in either the lateral axes and/or the vertical axis. There have been developments in area-integrating (scattering) methods for measuring surface topography that can be fast enough to use during a manufacturing process, but these are limited in the height range of surface topography with which they can be used.
In conventional machining, there has been a significant research effort to determine the surface topography of the machined parts during the manufacturing process. The dominant technology for this has been machine vision approaches, where a relationship between a texture parameter and an aspect of the measured field from an intensity sensor is determined. Such approaches have two major drawbacks: 1. they are usually applied to surfaces with geometrical features over a limited range and 2. they do not have the benefit of a physical model of the measurement process, i.e. they are purely empirical. As an example, the measurement and characterisation of the surface topography of additive manufactured parts remains a significant challenge, especially where measurement speed may be an issue. Typical metal additive manufactured surfaces have a large range of surface features, with the dominant features often being the weld tracks with typical wavelengths of a few hundred micrometres and amplitudes of a few tens of micrometres; such structures are beyond what can be measured effectively with existing commercial approaches.
In the proposed project, we aim to demonstrate that it is possible to measure rough and structured, machined or additive surfaces using a simple, cost-effective real-time measurement system. This will involve the development of a fully rigorous three-dimensional optical scattering model, which will be combined with a machine learning approach to mine optical scattering data for topographic information that is not within the range of commercial scattering instruments. The proposed system could be mounted into a machining or additive operation without slowing down the process, therefore, reducing the cost of many advanced products that require engineered surfaces. To demonstrate the commercial potential of the project outputs, we have several advanced manufacturing partners who will supply industrially relevant case studies and one partner who could act as the commercial exploitation route for the instrument.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.nottingham.ac.uk |