| EPSRC Reference: |
EP/T012862/1 |
| Title: |
Remote, 3D ultrasonic imaging in extreme environments using 2D laser induced phased arrays |
| Principal Investigator: |
Stratoudaki, Dr T |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Electronic and Electrical Engineering |
| Organisation: |
University of Strathclyde |
| Scheme: |
New Investigator Award |
| Starts: |
24 August 2020 |
Ends: |
23 August 2022 |
Value (£): |
324,884
|
| EPSRC Research Topic Classifications: |
| Eng. Dynamics & Tribology |
Instrumentation Eng. & Dev. |
| Microsystems |
Optical Devices & Subsystems |
|
| EPSRC Industrial Sector Classifications: |
|
| Related Grants: |
|
| Panel History: |
|
|
Summary on Grant Application Form |
The application of "phased array ultrasonics" has had a profound impact on science and medicine. It is the technology at the heart of all medical ultrasonic imaging systems and sonars. This proposal brings the equivalent of phased array technology to laser ultrasonics for remote, volumetric, 3D ultrasonic imaging.
In laser ultrasonics the sound is generated through the rapid thermal heating and expansion of the material under test, due to the incident laser radiation. However, there are serious signal-to-noise limitations associated with this technique, which could be addressed using an array configuration just as it happens with conventional, transducer based arrays. Up to now it has been very difficult to perform phased array ultrasonics with lasers because the technology to focus and steer the ultrasonic bulk waves for generation or detection puts severe demands on hardware (multiple lasers for ultrasonic generation or complicated experimental setups) and cost. The proposed work will be based on synthesising the Laser Induced Phased Arrays (LIPAs) in post processing, by first acquiring the Full Matrix and then applying a suitable imaging algorithm (e.g. the Total Focusing Method - TFM). The post processing of the optical based data in LIPAs, keeps the experimental setup simple and cost effective. These remote, couplant-free ultrasonic arrays, made of light, can be applied in extreme environments, for in-line process monitoring or in-service volumetric inspection. The aim of the proposed research is to develop a laser based ultrasonic measurement capability for remote, nondestructive, quantitative evaluation and 3D ultrasonic imaging in extreme environments for safety critical applications, where conventional arrays cannot be applied. 2D LIPAs will be able to image a given defect from a range of angles, obtaining characterisation detail far beyond what is achievable with a 1D array.
The core research objectives within this project are:
* Development of laser induced phased arrays for 3D ultrasonic imaging using FMC and TFM.
* Optimisation of the data collection method to laser ultrasonics to improve speed of process.
* Optimisation of the TFM imaging algorithm to laser ultrasonics for efficient ultrasonic imaging.
* Demonstration of system's industrial application potential for inspection and process monitoring in extreme environments.
The success of this work will benefit the non-destructive testing community, the laser ultrasonics community and will enable engineers and material scientists in need of a technique to address extreme environments and places of restricted access, to test the performance of their structures, either during the manufacturing process (e.g. additive manufacturing) or in-service (e.g. in situ inspection of radioactive waste containers). Examples of potential applications include: process understanding and control for manufacturing in extreme environments such as welding and additive manufacturing, increasing process reliability which is crucial for the future of additive manufacturing; in situ ultrasonic inspection in aero-engines or power generators. Other applications are expected in fields such as chemistry, biology and biomedical imaging where remote ultrasonic imaging is needed in sterilised or corrosive environments.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.strath.ac.uk |