|
| Name: |
Professor CJ Sutcliffe |
| Organisation: |
University of Liverpool |
| Department: |
Engineering (Level 1) |
| Current EPSRC-Supported Research
Topics: |
|
Design & Testing Technology
|
Manufacturing Machine & Plant
|
|
Materials Characterisation
|
Materials testing & eng.
|
|
| Current EPSRC Support |
| EP/T013141/1 | CMMI-EPSRC: Thermoacoustic response of Additively Manufactured metals: A multi-scale study from grain to component scales | (C) |
| EP/L01534X/1 | EPSRC Centre for Doctoral Training in Additive Manufacturing and 3D Printing | (C) |
|
| Previous EPSRC Support |
| EP/P027318/1 | Reactive Metal Jet Fusion Printing | (C) |
| EP/N017773/1 | Manufacturing with Light 2: photochemical ALD to manufacture functional thin films | (C) |
| EP/L02201X/1 | Manufacturing with Light - photochemical ALD to manufacture functional thin films | (C) |
| EP/K030884/1 | EPSRC Centre for Innovative Manufacturing in Laser-based Production Processes | (C) |
| EP/K040057/1 | MEASURING AND REPRODUCING THE 3D APPEARANCE OF HUMAN FACIAL SKIN UNDER VARYING ILLUMINATION CONDITIONS: A 3D IMAGING SYSTEM FOR HUMAN FACIAL SKIN | (C) |
| EP/K008633/1 | Towards Sinter-free Printing of Photovoltaic Cell Interconnects | (P) |
| EP/F008848/1 | Microengineering of Quadrupole Mass Spectrometers using RP techniques | (C) |
| EP/D064856/1 | Engineering Functional Materials for Catalytic Smart Microreactors | (P) |
| EP/C009525/1 | Novel Cellular Structures for Enhanced Impact Performance | (C) |
| EP/C009398/1 | High Throughput Selective Laser Melting of Cellular Components | (P) |
| EP/C519795/1 | Selective Laser Melting of high aspect ration 3D Microelectromechanical (MEM) Devices and Components - An Engineering of Functional Materials Proposal | (C) |
| GR/S99006/01 | Intermetallic Component Manufacture by Cold Gas Dynamic Manufacture (CGDM) | (C) |
| GR/S98405/01 | Rapid Manufacture of Industrially Relevant Hierachical Structures | (P) |
| GR/S99013/01 | Spiral Growth Manufacturing (SGM) | (P) |
| GR/S99020/01 | Development of Porous Structured Surfaces for Bone Interlock | (C) |
| GR/R64711/01 | innovative manufacturing technology research centre | (C) |
| GR/R32345/01 | Direct Route to the Production of Metallic Components using Selective Laser Sintering Technology | (C) |
| GR/R13432/01 | Cold Gas Dynamic Manufacturing | (R) |
| GR/N16778/01 | ANATOMICAL MODELS FOR CALIBRATION OF BLOOD VELOCITY MEASUREMENTS MADE USING DOPPLER ULTRASOUND | (C) |
| GR/M87429/01 | HIGH SPEED AUTOMATED LASER CUTTING SYSTEM FOR SHEET METAL OPERATIONS | (C) |
| GR/M11738/01 | MICRO LASER CUTTING OF THIN SECTIONS | (C) |
|
|
Key: (P)=Principal Investigator, (C)=Co-Investigator, (R)=Researcher Co-Investigator
|
| |
|
|
|
|