| EPSRC Reference: |
EP/C510925/1 |
| Title: |
Condensation On Low-Finned Tubes |
| Principal Investigator: |
Rose, Professor J |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
School of Engineering & Materials Scienc |
| Organisation: |
Queen Mary University of London |
| Scheme: |
Standard Research (Pre-FEC) |
| Starts: |
01 July 2005 |
Ends: |
30 September 2006 |
Value (£): |
70,774
|
| EPSRC Research Topic Classifications: |
| Energy Efficiency |
Heat & Mass Transfer |
|
| EPSRC Industrial Sector Classifications: |
|
| Related Grants: |
|
| Panel History: |
|
|
Summary on Grant Application Form |
|
Refrigeration and air conditioning account for a substantial proportion of the energy consumption of the UK and other developed counties. Efforts have been made in recent years to improve plant performance for fuel economy and reduction in carbon dioxide emissions. The problem has been exacerbated by the necessity to discontinue use of ozone depleting fluids. Several replacement refrigerants are now in wide use but some have significant global warming potential and their long-term future is in doubt. The condenser is a major component of refrigeration plant and for design purposes it is necessary to predict accurately the heat transfer performance of enhanced condenser tubes for any given fluid.Low integral fin condenser tubes are now widely used in modern plant. Design calculations are presently based on correlations of experimental data for former ozone-depleting fluids and their current replacements. Theoretical solution is problematic owing to the crucial role played by surface tension and curvature of the condensate surface which various in a complicated way over the fin and tube surface.Theoretical efforts to provide methods valid for any fluid have been partially successful but to date no wholly-theoretical and complete solution has been achieved. One of the present investigators (JWR) has proposed a theoretically-based method which is now widely used and has been adopted as the recommended design method by ESDU International plc. Before joining Professor Rose at QMUL the second investigator, Dr Wang, worked for three years with Professor Honda at Kyushu University. Professor Honda's earlier theoretical work on this problem is accepted as the most complete to date but suffers from acknowledged deficiencies. While at Kyushu, Dr Wang worked with Professor Honda on an unsuccessful attempt to overcome significant theoretical problems. In the course of their (EPSRC supported) work on condensation in microchannels, methods have been developed by the present investigators which should be adaptable for solution of the problem of condensation on integral fin tubes.We believe that we are uniquely placed to provide a complete theoretical solution to the problem in approximately one year. The results will be valid for any new refrigerants which may be developed to satisfy both ozone depletion and global warming constraints. If time permits we shall extend the solution to mixtures of vapours and effects of vapour velocity.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
|