Details of Grant 

EPSRC Reference:	EP/I036230/1
Title:	Nanostructured Thermoelectric Oxides for Energy Generation: A Combined Experimental and Modelling Investigation
Principal Investigator:	Freer, Professor R
Other Investigators:	Leach, Dr C
Researcher Co-Investigators:
Project Partners:	EMPA - Materials Science & Technology European Thermodynamics Ltd Jaguar Land Rover Limited Morgan Electroceramics Queen Mary University of London Ricardo Group Rolls-Royce Plc Tsinghua University University of Padua (Padova)
Department:	Materials
Organisation:	University of Manchester, The
Scheme:	Standard Research
Starts:	01 December 2011	Ends:	30 November 2014	Value (£):	362,169
EPSRC Research Topic Classifications:	Materials Characterisation
EPSRC Industrial Sector Classifications:	Energy
Related Grants:	EP/I03601X/1
Panel History:	Panel Date Panel Name Outcome 12 May 2011 EPSRC Physical Sciences Materials - May Announced
Summary on Grant Application Form
The Seebeck effect is a thermoelectric effect whereby a temperature gradient across a material is converted to a voltage, which can be exploited for power generation. The growing concern over fossil fuels and carbon emissions has led to detailed reviews of all aspects of energy generation and routes to reduce consumption. Thermoelectric (TE) technology, utilising the direct conversion of waste heat into electric power, has emerged as a serious contender, particular for automotive and engine related applications. Thermoelectric power modules employ multiple pairs of n-type and p-type TE materials. Traditional metallic TE materials (such as Bi2Te3 and PbTe), available for 50 years, are not well suited to high temperature applications since they are prone to vaporization, surface oxidation, and decomposition. In addition many are toxic. Si-Ge alloys are also well established, with good TE performance at temperatures up to 1200K but the cost per watt can be up to 10x that of conventional materials. In the last decade oxide thermoelectrics have emerged as promising TE candidates, particularly perovskites (such as n-type CaMnO3) and layered cobaltites (e.g. p-type Ca3Co4O9) because of their flexible structure, high temperature stability and encouraging ZT values, but they are not yet commercially viable. Thus this investigation is concerned with understanding and improving the thermoelectric properties of oxide materials based on CaMnO3 and ZnO. Furthermore, not only do they represent very promising n-type materials in their own right but by using them as model materials with different and well-characterised structures we aim to use them to identify quantitatively how different factors control thermoelectric properties. The conversion efficiency of thermoelectric materials is characterised by the figure of merit ZT (where T is temperature); ZT should be as high as possible. To maximise the Z value requires a high Seebeck coefficient (S), coupled with small thermal conductivity and high electrical conductivity. In principle electrical conductivity can be adjusted by changes in cation/anion composition. The greater challenge is to concurrently reduce thermal conductivity. However in oxide ceramics the lattice conductivity dominates thermal transport since phonons are the main carriers of heat. This affords the basis for a range of strategies for reducing heat conduction; essentially microstructural engineering at the nanoscale to increase phonon scattering. The nanostructuring approaches will be: (i) introduction of foreign ions into the lattice, (ii) development of superlattice structures, (iii) nanocompositing by introducing texture or nm size features (iv) development of controlled porosity of different size and architecture, all providing additional scattering centres. Independently, TE enhancement can also be achieved by substitution of dopants to adjust the electrical conductivity. By systematically investigating the effect of nanostructuring in CaMnO3 and ZnO ceramics, plus the development of self-assembly nanostructures we will be able to define the relative importance of the factors and understand the mechanisms controlling thermal and electron transport in thermoelectric oxides. A key feature of the work is that we will adopt an integrated approach, combining advanced experimental and modelling techniques to investigate the effect of nanostructured features on the properties of important thermoelectric oxide. The modelling studies will both guide the experimentalists and provide quantitative insight into the controlling mechanisms and processes occurring at the atom level to the grain level, while the experiments will provide a rigorous test of the calculation of the different thermoelectric properties. We will assess the mechanical performance of optimised n-type and p-type materials, and then construct thermoelectric modules which will be evaluated in automobile test environments.
Key Findings
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Potential use in non-academic contexts
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Impacts
Description This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk Summary Date Materialised
Sectors submitted by the Researcher
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Project URL:
Further Information:
Organisation Website:	http://www.man.ac.uk