| EPSRC Reference: |
EP/N50841X/2 |
| Title: |
Innovative Low Carbon, High Fuel Efficiency Power Generation Technology |
| Principal Investigator: |
Cairns, Professor A |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Faculty of Engineering |
| Organisation: |
University of Nottingham |
| Scheme: |
Technology Programme |
| Starts: |
01 February 2017 |
Ends: |
30 November 2017 |
Value (£): |
110,813
|
| EPSRC Research Topic Classifications: |
|
| EPSRC Industrial Sector Classifications: |
|
| Related Grants: |
|
| Panel History: |
|
|
Summary on Grant Application Form |
The overall goal of the work at Brunel would be to improve understanding of the ideal combustion system via theoretical
analysis, simulation and engine testing.
The objective of the first phase of work at Brunel would be to specify a combustion system that can attain the highest
combustion and thermal efficiencies within the unique environment of relatively high starting temperature, low starting
pressure and expanding volume. Initial work would involve benchmarking the requirements of the combustion system.
Specifically, this would be reliant upon use of existing empirical data for key nominated fuels (including natural gas and
other potential biofuels offering synergy). Such calculations would provide a baseline. In reality faster modes may be
required (e.g. fuel stratification, dual fuel etc). Thereafter, formal engineering concept generation and selection procedures
would be adopted to specify the ideal combustion system type and layout. The performance of the system taken forward
would then be evaluated in detail using existing 1D thermodynamic (GT-Power) and/or 3D CFD simulation codes. In
addition to this simulation work Brunel would undertake a detailed review of potential markets and appropriate fuels for the
technology, with a full report on potential future opportunities prepared.
Thereafter, in the second phase of work at Brunel the single cylinder would be fitted to an engine test bed and the
operation of the novel unit fully quantified in terms of mechanical operation, gas exchange efficiency, combustion efficiency,
thermal efficiency, fuel economy and engine-out emissions. This work would make use of the existing industry standard
test facilities at Brunel, with development support provided by the industrial partners as required. Specifically, the engine
operation and efficiencies would be evaluated at rated power and other key sites nominated to aid understanding of the
novel mode of operation. Finally, these test results would be used to fully correlate the engine simulation and hence
maximise understanding of the novel mode of engine operation proposed.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.nottingham.ac.uk |